Stanford researchers report power generation from radiative cooling of a PV cell at night using a thermoelectric generator (TEG) module.
New research paper “Nighttime electric power generation at a density of 50 mW/m2 via radiative cooling of a photovoltaic cell” from Stanford, supported by U.S. Department of Energy and the Strategic Energy Alliance program at Stanford University.
Abstract: “A large fraction of the world’s population lacks access to the electric grid. Standard photovoltaic (PV) cells can provide a renewable off-grid source of electricity but only produce power from daytime solar irradiance and do not produce power at night. While there have been several theoretical proposals and experimental demonstrations of energy harvesting from the radiative cooling of a PV cell at night, the achieved power density is very low. Here, we construct a device, which incorporates a thermoelectric generator that harvests electricity from the temperature difference between the PV cell and the ambient surrounding. We achieve 50 mW/m2 nighttime power generation with a clear night sky, with an open-circuit voltage of 100 mV, which is orders of magnitude higher as compared with previous demonstrations. During the daytime, the thermoelectric generator also provides additional power on top of the electric power generated directly from the PV cells. Our system can be used as a continuous renewable power source for both day- and nighttime in off-grid locations.”
Find the open access technical paper link here. Published April 2022.
Sid Assawaworrarit, Zunaid Omair, and Shanhui Fan , “Nighttime electric power generation at a density of 50 mW/m2 via radiative cooling of a photovoltaic cell”, Appl. Phys. Lett. 120, 143901 (2022) https://doi.org/10.1063/5.0085205.
Visit Semiconductor Engineering’s Technical Paper library here and discover many more chip industry academic papers.
Name* (Note: This name will be displayed publicly)
Email* (This will not be displayed publicly)
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
100% inspection, more data, and traceability will reduce assembly defects plaguing automotive customer returns.
Tech and auto giants are putting even more pressure on the semiconductor labor market. Some say it could be just what the industry needs.
Why UCIe is so important for heterogeneous integration.
There are at least three architectural layers to processor design, each of which plays a significant role.
Interest in this particular ISA is expanding, but the growth of other open-source hardware is less certain.
Nanosheets are likeliest option throughout this decade, with CFETs and other exotic structures possible after that.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Different interconnect standards and packaging options being readied for mass chiplet adoption.
Disaggregation and the wind-down of Moore’s Law have changed everything.
Some of the less common considerations for assessing the suitability of a system for high-performance workloads.